Due to Covid 19, we are only fulfilling our existing orders. More stock is on its way for new orders. Re-opening on April 7, 2020. Still accepting new business inquires and purchase orders.
IMPORTANT - Click here for more info
Benzalkonium Chloride Uses: Spray disinfectants for hard surface sanitization; Cleaners for floor and hard surfaces as a disinfectant, such as Lysol and Dettol antibacterial spray and wipes. Read more here.
Benzalkonium chloride (as Roccal or Zephiran) was found to inactivate influenza, measles, canine distemper, rabies, fowl laryngotracheitis, vaccinia, Semliki Forest, feline pneumonitis, meningopneumonitis, and herpes simplex viruses after 10 minutes of exposure at 30 C or at room temperature. Read more here.
Type A influenza viIrus was inactivated by concentrations of benzalkoniunm chloride as low as 0.025 mng/iml. Measles and canine distemper viruses were also sensitive to the quaternary. Feline pneuiinonitis and miieningopneumionitis agents were inactivated by benzalkonium chloride after 10 minutes of exposure at room temperature. Rabies, fowl laryngotracheitis, Seliliki Forest, and herpes simplex viruses were rapidly inactivated by low concentrations of benzalkonium chloride. Review more information on the virucidal activity of benzalkonium chloride for 13 viruses here.
Benzalkonium Chloride Demonstrates Concentration-Dependent Antiviral Activity Against Adenovirus In Vitro. Benzalkonium chloride (BAK) is a common preservative in ophthalmic medications and is the active ingredient in some skin disinfectants and hand sanitizers. Read more here.
Benzalkonium Chloride is a commonly used preservative in contact lens solutions and can be found as an ingredient in antimicrobial soaps, skin antiseptics, and spermicides. Safety Information: It was concluded that Benzalkonium Chloride can be safely used as antimicrobial agent at concentrations up to 0.1%. Read more here.
Benzalkonium chloride (BAC) is a wide spectrum quaternary ammonium antibacterial agent that has been used in various dental composites. It is cationically charged and induces antibacterial action through attraction to the negatively charged bacterial membrane. Read more here.
The benzalkonium chloride was found to be active against all fungal species but to a different extent. Addition of ethylenediamine-tetraacetic acid and its sodium salt increased the sensitivity of fungi to benzalkonium chloride. Read more here.
Benzalkonium chloride formulations for consumer use are dilute solutions. Concentrated solutions are toxic to humans, causing corrosion/irritation to the skin and mucosa, and death if taken internally in sufficient volumes. Read more here.
The process of dermal wound healing can be accelerated by the application of active ingredients, such as benzalkonium chloride (BKC). BKC is a widely used disinfectant as well as a bactericidal to prevent infection in wounds. Read more here.
Brief Summary: The aim of the study is to evaluate the irritation potential of benzalkonium chloride disinfectant spray when placed in contact with normal human skin. Detailed Description: Benzalkonium chloride is recognized as safe and effective for short term use as first aid antiseptic drug products. Read more here.
Benzalkonium chloride can be found in household cleaning products, such as laundry rinses/detergents, personal care products, wet wipes, antiseptics, eye drops and ophthalmic solutions, nasal sprays and asthma inhalers (tiotropium), dental products and Plaster of Paris. Read morehere.
Benzalkonium Chloride wipes also known as, towelettes, are used as a skin disinfectant. They are ideal for cleansing a wound. Effective against bacteria, viruses, fungi and protozoa. They are often used to prep the skin around the urethra before using a catheter. Read more here.
Benzalkonium chloride is a human skin and severe eye irritant. It is a suspected respiratory toxicant, immunotoxicant, gastrointestinal toxicant and neurotoxicant. Benzalkonium chloride formulations for consumer use are dilute solutions. Concentrated solutions are toxic to humans, causing corrosion/irritation to the skin and mucosa, and death if taken internally in sufficient volumes. 0.1% is the maximum concentration of benzalkonium chloride that does not produce primary irritation on intact skin or act as a sensitizer. Poisoning by benzalkonium chloride is recognised in the literature. A 2014 case study detailing the fatal ingestion of up to 8.1 oz (240ml) of 10% benzalkonium chloride in a 78-year-old male also includes a summary of the currently published case reports of benzalkonium chloride ingestion. While the majority of cases were caused by confusion about the contents of containers, one case cites incorrect pharmacy dilution of benzalkonium chloride as the cause of poisoning of two infants. Benzalkonium chloride poisoning of domestic pets has been recognised as a result of direct contact with surfaces cleaned with disinfectants using benzalkonium chloride as an active ingredient. As many as 20 people were killed in Japan, by a nurse injecting this.
Signs of an allergic reaction, like rash; hives; itching; red, swollen, blistered, or peeling skin with or without fever; wheezing; tightness in the chest or throat; trouble breathing, swallowing, or talking; unusual hoarseness; or swelling of the mouth, face, lips, tongue, or throat. Read morehere.
Benzalkonium chloride (BAK) is a preservative that has been used in ophthalmology since the 1940s, and is found in up to 70% of eye drops. BAK, a quaternary ammonium compound, acts as a detergent, lysing cell membranes, and killing microorganisms. This makes it very effective as a preservative. Read morehere.
Benzalkonium chloride (BAK) is the most commonly used eye drop preservative. Benzalkonium chloride has been associated with toxic effects such as “dry eye” and trabecular meshwork degeneration, but the underlying biochemical mechanism of ocular toxicity by BAK is unclear. Read morehere.
Benzalkonium chloride (BAC) is a wide spectrum quaternary ammonium antibacterial agent that has been used in various dental composites. It is cationically charged and induces antibacterial action through attraction to the negatively charged bacterial membrane. Read morehere.
The process of dermal wound healing can be accelerated by the application of active ingredients, such as benzalkonium chloride (BKC). BKC is a widely used disinfectant as well as a bactericidal to prevent infection in wounds. Its antimicrobial activity has been proven in many previous studies. Read morehere.
Nutri-Vet Antimicrobial Wound Spray for dogs is an easy-to-use antiseptic for dog wound care. Benzalkonium Chloride works as an antiseptic and is one of the safest synthetic biocides. Soothing aloe contains enzymes, proteins, and growth factors that reduce inflammation, promote healing, and reduce pain. Read morehere. Benzalkonium Chloride is used foranimal wound care and skin care.
The FDA found that the active ingredient, benzalkonium chloride, is not indicated as a cold sore treatment and may not make cold sore healing claims because there is no scientific evidence to support claims that it heals cold sores. Read morehere.
AgriLabs Foot Rot and Ringworm Spray (benzalkonium chloride) for use on cattle, sheep, horses, dogs and cats as an aid in the control of Summer Itch, Girth Itch, Foot Rot, Ringworm and other fungal problems. Read morehere.
It is a fact that benzalkonium chloride is toxic to cats. The “primary adverse effects from benzalkonium chloride exposure are due to its irritancy which results in local tissue damage,” notes International Cat Care. Read morehere.
Benzalkonium Chloride is primarily used as a preservative and antimicrobial agent, and secondarily used as a surfactant. It works by killing microorganisms and inhibiting their future growth, and for this reason frequently appears as an ingredient in antibacterial hand wipes, antiseptic creams and anti-itch ointments. Read morehere.
On account of its non-toxic, non-corrosive, non-tainting, non-staining characteristics, benzalkonium chloride is the main active use in the formulation of disinfectants and bactericidal sanitisers for healthcare, personal hygiene, the public sector and to safeguard our agriculture and food supply. Read more here.
Benzalkonium Chloride SDS And MSDS
Please contact Lab Alley at 512-668-9918 or byemailto request aSafety Data Sheet (SDS)and Certificate of Analysis (COA) for Benzalkonium Chloride 50% Solution.
Benzalkonium chloride, also known as BZK, BKC, BAK, BAC, alkyldimethylbenzylammonium chloride and ADBAC, is a type of cationic surfactant. It is an organic salt classified as a quaternary ammonium compound. It has three main categories of use: as a biocide, a cationic surfactant, and as a phase transfer agent. ADBACs are a mixture of alkylbenzyldimethylammonium chlorides, in which the alkyl group has various even-numbered alkyl chain lengths. Read more here.
Solubility And Physical Properties
Depending on purity, benzalkonium chloride ranges from colourless to a pale yellow (impure). Benzalkonium chloride is readily soluble in ethanol and acetone. Dissolution in water is slow. Aqueous solutions should be neutral to slightly alkaline. Solutions foam when shaken. Concentrated solutions have a bitter taste and a faint almond-like odour. Standard concentrates are manufactured as 50% and 80% w/w solutions, and sold under trade names such as BC50, BC80, BAC50, BAC80, etc. The 50% solution is purely aqueous, while more concentrated solutions require incorporation of rheology modifiers (alcohols, polyethylene glycols, etc.) to prevent increases in viscosity or gel formation under low temperature conditions.
Benzalkonium chloride also possesses surfactant properties, dissolving the lipid phase of the tear film and increasing drug penetration, making it a useful excipient, but at the risk of causing damage to the surface of the eye°.
Laundry detergents and treatments
Softeners for textiles
Phase Transfer Agent
Benzalkonium chloride is a mainstay of phase-transfer catalysis, an important technology in the synthesis of organic compounds, including drugs.
Especially for its antimicrobial activity, benzalkonium chloride is an active ingredient in many consumer products:
Pharmaceutical products such as eye, ear and nasal drops or sprays, as a preservative
Personal care products such as hand sanitizers, wet wipes, shampoos, deodorants and cosmetics
Skin antiseptics, such as Bactine and Dettol.
Throat lozenges and mouthwashes, as a biocide
Over-the-counter single-application treatments for herpes, cold-sores, and fever blisters, such as RELEEV and Viroxyn
Burn and ulcer treatment
Spray disinfectants for hard surface sanitization
Cleaners for floor and hard surfaces as a disinfectant, such as Lysol
Algaecides for clearing of algae, moss, lichens from paths, roof tiles, swimming pools, masonry, etc.
Benzalkonium chloride is also used in many non-consumer processes and products, including as an active ingredient in surgical disinfection. A comprehensive list of uses includes industrial applications. An advantage of benzalkonium chloride, not shared by ethanol-based antiseptics or hydrogen peroxide antiseptic, is that it does not cause a burning sensation when applied to broken skin. However, prolonged or repeated skin contact may cause dermatitis.
Benzalkonium chloride is a frequently used preservative in eye drops; typical concentrations range from 0.004% to 0.01%. Stronger concentrations can be caustic and cause irreversible damage to the corneal endothelium. Avoiding the use of benzalkonium chloride solutions while contact lenses are in place is discussed in the literature.
Buy Safe Ingredients And Chemicals For DIY Homemade Hand Sanitizers, Cosmetics, Makeup, Lotions, Soaps, Household Cleaning Products, Laboratory Sterilization, Food And Beverage Processing, Skin Care Formulations, Hospital Disinfectants,Personal Care Products, Botanical And Essential Oils, Botanical Extracts, Pharmaceutical Drugs, Herbal Tinctures, Kid Safe Pools, Pest Control Products, Lawn Care Products, Chemistry Labs, Natural Health Supplements And Vitamins, Coronavirus Disinfection Products, Perfumes, Hospital Grade Detergents, Disinfecting Wipes And Disinfectant Sprays At LabAlley.com
Vaccines against pneumonia, such as pneumococcal vaccine and Haemophilus influenza type B (Hib) vaccine,do not provide protection against the new coronavirus. The virus is so new and different that it needs its own vaccine. Researchers are trying to develop a vaccine against 2019-nCoV, and WHO is supporting their efforts. Although these vaccines are not effective against 2019-nCoV, vaccination against respiratory illnesses is highly recommended to protect your health.